Instructional Videos
Industrial Hygiene
This how-to video on using impingers in personal or area sampling provides all the details necessary. It includes setting up the sample train, calibrating the system and how to properly handle the impinger solutions after sampling is completed.
Industrial Hygiene
If you need to collect inhalable dust samples using a modified NIOSH 500 method an IOM will be required. Calibrating a sampling pump with an IOM in-line is demonstrated in this short video. You may want to have the IOM, pump and other accessories with you during the video.
Industrial Hygiene
Some NIOSH, OSHA or other sampling methods require the use of 2 sorbent tubes in series. This video provides the precise information necessary to put the sampling train together in preparation for calibration with the field rotameter. It includes instruction on proper directional alignment of the tubes, the constant pressure controller and the adjustable low flow holder.
Industrial Hygiene
One of the most popular techniques for collecting airborne gases or vapors using various sampling methods, like many provided by NIOSH or OSHA, involves the use or a single sorbent tube and a personal sampling pump. This short video demonstrates putting together the sampling train and calibrating the pump with a field rotameter.
Industrial Hygiene
If you need to collect respirable dust or silica samples using NIOSH or OSHA methods a cyclone will be required. Calibrating a sampling pump with a cyclone in-line is demonstrated in this short video. You may want to have the cyclone, pump and other accessories with you during the video.